- FramePro 600
- FramePro 650
- SN60 / SN65 / SN65C
- SN60MC
- SN70
|
 |
Depth-of-drive control and EZ Clear nail jam feature
|
FramePro 600 With the highest power-to-weight ratio in its
class, this compact model is easy to handle and easy on the arm. Its short, 30 degree
in-line magazine provides excellent maneuverability and line of sight. The FramePro's aggressive, sawtooth toenail
safety grips studs effectively when driving at an angle.
Fastener Specifications:
The FramePro 600 drives the following types of nails:
 | 2" through 3-1/2" (50 - 90mm) smooth-shank nails (Sencote® or
plain) |
| 2" to 3" (50 - 75mm) ring-shank nails
|
| 3" (75mm) screw-shank and clipped "D" head nails
|
- Shank diameters include .113", .120", .131" and
.148".
- Ring-Shank Nails
- Screw-Shank Nails
- Flat Head Strip Nails
|
FramePro 600 Specifications:
- Tool Weight: 8.0 lbs. (3.6 kg)
- Height: 13-1/4" (336mm)
- Length: 15" (381mm)
- Nail Capacity: 56-80, depending on gauge
- Mode of Operation: Available with either Restrictive Trigger or
Dual Action activating mechanisms
- Reg. Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 Bar)
The FramePro 600 is the contractors tool
of choice and can handle most of the common (.131" diameter nail) framing &
sheathing applications. The 600 even works well with most wood to green concrete applications.
The FramePro 650, with 10 percent more
power than the 600 model,
should be used for laminated woods, frozen woods, trusses or wood-to-concrete block, or
where .148" diameter nails are used for framing. |
|
|
|
Depth-of-drive control and EZ Clear nail jam feature
|
FramePro 650 Offering 10
percent more power than the FramePro 600, the FramePro 650 can be used to drive
trusses or wood-to-concrete block. |
FramePro 650 Specifications:
- Tool Weight: 8.4 lbs. (3.8 kg)
- Height: 14-1/4" (356mm)
- Length: 15" (381mm)
- Nail Capacity: 56 - 80, depending on gauge
- Mode of Operation: Available with either Restrictive Trigger or
Dual Action activating mechanisms
- Reg. Operating Pressure: 70 - 120 p.s.i.g. (4.8 - 8.3 Bar)
|
Fastener Specifications:
- The FramePro 650 drives the following types of nails:
| 2" through 3-1/2" (50 - 90mm) smooth-shank nails (Sencote® or
plain) |
| 2" to 3" (50 - 75mm) ring-shank nails
|
| 3" (75mm) screw-shank and clipped "D" head nails
|
- Shank diameters include .113", .120", .131" and
.148".
|
|
- Ring-Shank Nails
- Screw-Shank Nails
- Flat Head Strip Nails
|
|
|
|
Adjustable depth-of-drive
|
- SN60 Nailer
- Shipped complete with a comfort-grip handle, the SN60 drives a variety of full round-head
nails. Its excellent balance, power-to-weight ratio (7.7 lbs.)(3.5kg) and adjustable
depth-of-drive control deliver just the right countersink.
|
- SN60 Nailer Specifications:
- Tool Weight: 7.7 lbs. (3.5
kg)
Height: 13-1/2" (safety extended) (343 mm)
Length: 19-3/4" (502 mm)
Lip Length: 3/8" (10 mm)
Magazine Capacity: 60
Mode of Operation: Available with either Restrictive Trigger or Dual Action
activating mechanisms
Reg. Operating Pressure: 70-120 p.s.i.g.
Hose Fitting: 3/8" (10 mm)
|
- Fastener Specifications:
- The SN60
drives true round-head framing nails, ranging from 2" to 3-1/2"* in length (50 to 90 mm)
- * 3-1/2" (90mm) nail for
soft wood applications only
-
- Ring-Shank Nails
- Screw-Shank Nails
- Flat Head Strip Nails
|
-
-
- SN65/65C Nailer Specifications:
- Tool Weight: 8.1 lbs. (3.7 kg)
Height: 13-5/8" (359mm)
Length: 19-3/4" (502mm)
Lip Length: 3/8" (10mm)
Magazine Capacity: 60
Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 bar)
Mode of Operation: Available with either Restrictive Trigger or Dual Action
activating mechanisms
|
-
-
- SN65/65C Nailer
- Along with all the comfort, balance and drive attributes of the SN60,
the SN65 and
SN65C have increased power-to-weight
ratios (8.1 lbs)(3.7kg) and 15 percent more power than the SN60.
Fastener Specifications:
The SN65 drives
true round-head framing nails, ranging from 2" to 3-1/2" in length (50 to 90mm).
The SN65C drives 2-1/2"
to 3-1/2" (65 to 90mm) common nails.
Ring-Shank Nails
Screw-Shank Nails
Flat Head Strip Nails
|
|
SN60MC Metal Connector Nailer Specifications:
- Tool Weight: 7.7 lbs. (3.5 kg)
Height: 12-13/16" (325mm)
Length: 14" (365mm)
Width: 4-5/8" (109mm)
Magazine Capacity: 30
Operating Pressure: 80-120 p.s.i.g. (5.5-8.3 bar)
Mode of Operation: Available only with Restrictive Trigger activating mechanisms
- Hose Fitting: 1/4" (6mm)
|
- SN60MC
- Designed for earthquake & high-wind areas where codes call for metal
connecting plates. Accurately fasten the full range of metal connectors with unique hole
locating safety design.
-
- Fastener Specifications:
- The SN60MC drives
.131", .148" & .162 full round-head framing nails in lengths of 1-1/2"
and 2-1/2".
-
-
|
|
|
|
|
-
-
- SN70 Nailer:
- Designed for a wide variety of on-site and in-plant construction
applications, the SN70 drives
hardened steel nails for wood-to-concrete block or poured concrete applications. It is
also designed for crate and box assembly, pallet making, furniture frame assembly and
cabinet work.
|
- SN70 Nailer Specifications:
- Tool Weight: 9.7 lbs. (4.4 kg)
Height: 14-11/16" (373 mm)
Length: 15-7/8" (403 mm)
Lip Length: 1/2" (10 mm)
Magazine Capacity: 60 to 70, depending on shank size
Reg. Operating Pressure: 65-120 p.s.i.g.
|
- Fastener Specifications:
- The SN70 drives the following types of nails:
2" to 3-1/2" (50-90mm) smooth-shank, flat round-head nails (Sencote® or plain)
2" to 3" (50-75mm) screw-shank nails
Shank diameters vary from .113" to .131"
- Most nails available with optional electro-galvanization, Weatherex II, or hot dip galvanized
plating for corrosion resistance
- A modified SN70 drives the 20d,
KC31 smooth-shank 4" (100mm) nail
- Ring-Shank Nails
- Screw-Shank Nails
- Flat Head Strip Nails
|
