- SPS
- PW / PW2"
- MW
|
|
|
|
-
- SPS Roofing Stapler:
- Designed with a special wear plate, hardened safety mechanism and
shingle-depth gauge, the SPS drives staples from 7/8" to 1-1/2" (20 to 38mm). It is ideal for
composite shingle roofing, reroofing applications and roofing felt installation. The SPS is also excellent for lath wire
and insulation attachment, furniture and cabinet assembly, and carton-to-skid attachment
in packaging.
|
- SPS Tool Specifications:
- Tool Weight: 5.3 lbs. (2.4 kg)
Height: 9-7/8" (251 mm)
Length: 13-1/2" (343 mm)
Tool Width (Main Body): 3-1/32" (78 mm)
Staple Capacity: 140+
Mode of Operation: Available with either Restrictive Trigger or Dual Action
activating mechanisms
Operating Pressure: 70-120 p.s.i.g.
|
- Fastener Specifications:
- The SPS Roofing Stapler drives the following P Series Staples:
Leg Length: 7/8" to 1-1/2" (20 to 38mm)
- Crown: 1" (25.4mm)
Width: .062" (1.6mm)
Thickness: .055" (1.4mm)
Gauge: 16
- Heavy Wire
|
|
 |
-
-
- PW Roofer / PW Industrial / PW-2" Wide-Crown
Staplers:
- A longtime favorite with the pros, the PW Roofer is ideal for asphalt and fiberglass shingle
roofing applications. The PW Roofer drives staples from 1/2" to 1-1/4",(13 to 32mm). The roofer model
comes equipped with a special wear plate, a hardened safety mechanism, and a handy shingle
gauge to ensure consistent spacing from course-to-course. (specify #130003N)
- The PW Industrial also drives from 1/2" to 1-1/4" and is ideal for attaching
insulation, lathing, belt lines, furniture/cabinet frame butt-jointing and carton-to-skid.
(specify #130002N)
- The PW-2" is primarily used in wire lath applications, insulative sheathing, styro, ridge
vents, and industrial applications where longer leg staples are desired. (specify
#130063N)
|
- PW/PW-2" Tool
Specifications:
- Tool Weight: 4.9 lbs. (2.2 kg)
Height: 8-1/16" (204mm)
Length: 12-1/2" (317mm)
Lip Length: 1/4" (13mm)
Staple Capacity: 140+
Mode of Operation: Tool is available with either Restrictive Trigger or Dual Action
activating mechanism
Operating Pressure: 80-100 p.s.i.g.
|
- Fastener Specifications:
- The PW/PW-2" Roofer drives the following P Series Staples:
Leg Length: PW drives
- 1/2" to 1-1/4" (13 to 32 mm), PW-2" drives - 1" to 2" (25 to 50mm)
Crown: 1" (25 mm)
- Width: .062" (1.6mm)
Thickness: .055" (1.4 mm)
Gauge: 16
-
- Heavy Wire
|
|
 |
-
-
- MW Wide-Crown Stapler:
- Engineered for asphalt and fiberglass shingle roofing and lathing
applications, the MW
drives staples from 3/4" to 1-1/2". (20 to 38mm) It too comes with a special
wearplate and hardened safety.
|
MW Tool
Specifications:
- Tool Weight: 7.4 lbs (3.3 kg)
Height: 9-3/4" (248mm)
Length: 12-9/16" (318mm)
Stapler Capacity: 140+
Mode of Operation: Tool is available with either Restrictive Trigger or Dual Action
activating mechanism
- Operating Pressure: 80-100 p.s.i.g.
|
- Fastener Specifications:
- The MW Wide-Crown Stapler uses the following P Series Staples:
- Leg Length: 3/4" to 1-1/2". (20 to 38mm)
Crown: 1" (25.4mm)
Width: .062" (1.6mm)
Thickness: .055" (1.4mm)
Gauge: 16
-
- Heavy Wire
|
