22" Epoxy Coated Roller Drawer Slide, FR 1921

  • 22"  Epoxy Coated Roller Drawer Slide, FR 1921

click on thumbnail to zoom
Other products by Fulterer
Item #: 70059
Reg. Price: $9.29
Web Price: $4.67 Pair
39 in stock.
Usually Ships in 24 hours.
Additional quantities usually ships in
1-4 weeks
Drawer Slides
  • buy at least 100, save 15%
  • buy 20 to 99, save 10%
  • buy 10 to 19, save 5%


Fulterer LogoThe Fulterer FR 1921 550mm/22" Epoxy Coated, Roller, Parital Extension Drawer Slides are ideal for kitchen cabinets, furniture and other woodworking projects. 

The rails are made from cold rolled steel, with a white powder coat finish. Economical, with good running qualities thru precision nylon rollers and smooth epoxy coating.  The cabinet profiles specially formed to prevent rollers from touching any protruding screws. Long gravity self-closing ramp on all four profiles assures perpendicular closing action. The FR 1921 is suitable for furniture, RTA and kitchen cabinet applications

The captive guide rail running the full drawer extension ensures excellent on-track precision. Available in White. Length: 550mm (21.65") Extension Loss: 105mm (4.13") Weight Capacity: 75 lbs. KCMA (34kg.) Installation Width: 12.5 mm (0.49 in.) is the actual width of the slide. Allow a min. of 13 mm (0.51 in.) for clearance.

Features & Specifications of the Fulterer FR1921 550mm/22" drawer slides. 

Weight Class
75 lbs.
Unit of Measure
  • Made of White Powder Coated Cold Rolled Steel
  • System 32 compatible hole locations
  • Precision nylon rollers
  • Lift-Out drawer removal
  • Extension
    Partial Extension
    More Fulterer
    Whats Included
    4 Drawer rails enough for 1 drawer.
    Bottom Mount
    Manufactured in
    Installation width
    12.7 mm (0.50")
    37 mm (1.456")
    Closed Length
    550 mm (21-21/32")
    445mm (17.52")
    Extension Loss
    105mm (4.13")
    Disconnect Type
    Soft Close
    More Help
    Email Support
    36 inch Heavy Duty Drawer Slide, FR5400
    Deerwood, CFXP05058R2Z, #5 x 5/8 Screws, Flat Phillips,  Zinc
    Deerwood, CFXP05058R2Z, #5 x 5/8 Screws, Flat Phillips,  Zinc


    Average Rating:
    (based on 1 review)

    Showing 1 Review:

    by Paul
    on 10/5/2020
    from Florida
    Excellent Value for the $$
    I didn't buy these expecting all the bells & whistles of the expensive ball-bearing slides. I bought these because I'm replacing an old array of 7 drawer cabinets (3/4" particle board), with 6 drawer stacks using 7/16 OSB for my garage/shop. Probably 72 drawers by time I'm done. Cost is my primary concern. The old cabinet had fancy slides that got all messed up despite being 'superior' in rating, and ridiculous in price. Based on the 'feel' of the parts, I think the '75lb class' rating is not only exceedingly optimistic, I think it's unreasonable, unless 'acceptable' performance & lifetime operation of the drawer is only a few dozen to a hundred times to failure is somehow OK. Will the parts hold 75 lbs in the closed position? Yes! Without a doubt. Will 75lbs quickly crush the wheels in the fully open position? Yes. Without a doubt! Would buy again? Yes. Delivery: Arrived on time.
    Review and Rate this Item

    Customer Testimonials

    Related Products

    22 inch, 100 lb., CS,  Full Extension Drawer Slide, Zinc

    Top Sellers