Markant 11 Flap Hinge Nickel

https://www.ovisonline.com/web/image/product.template/29/image_1920?unique=cf81ed7

Hinge parts are mounted separately in bottom panel and flap, enabling subsequent flap assembly. Flaps are aligned through independent height, side and depth adjustment.

Item#: 9046480

8.88 Units 8.88 USD 8.88

8.88

Reqest a Quote

    This combination does not exist.

    Volume Discounts
    • Buy 50, save 10%
    • Buy 200, save 20%

    Request a Quote for Larger Quantities

    Terms and Conditions
    Items in stock usually ships in 24 hours

    Description Logo
    Hinge parts are mounted separately in bottom panel and flap, enabling subsequent flap assembly. Flaps are aligned through independent height, side and depth adjustment. Identical hole dimensions in bottom panel and flap. Three screw fasteners ensure firm and exact hinge seating in bottom panel and flap. Hole edge break-out is hidden by covering lip. In open position, inside face edges of bottom panel and flap are flush before height adjustment.

    • Requires 2, 35mm diameter holes 12.1 mm deep. See specifications sheet linked below for details
    • Flap hinge for overlay flaps
    • Quality classification under EN 15828, Level 2
    • Separate installation of bottom panel and flap element
    • Flap alignment through adjustment of height, sides and depth
    • Same drilling sizes in bottom panel and flap elements
    • Hole drilling concealed by rim on both parts
    • Without height adjustment, bottom panel and flap are flush on the inside when open
    • Can only be used in conjunction with flap stays
    • Nickel plated die-cast zinc
    Unit of Measure
    Each
    Whats Included
    1 hinge with two leaves, no screws
    Specification Sheet
    Installation Instructions
    Hettich Markant 11 Instructions
    (0.11 Mb PDF file)
    Flip Door/column Hinge NP SC
    Flip Door/column Hinge NP SC
    SKU: 1019879
    16.30 Price: 16.30
    Selekta Pro 270⁰ 15 ovl Hinge Arm
    Selekta Pro 270⁰ 15 ovl Hinge Arm
    SKU: 9022299
    9.95 Price: 9.95
    Hinge parts are mounted separately in bottom panel and flap, enabling subsequent flap assembly. Flaps are aligned through independent height, side and depth adjustment. Identical hole dimensions in bottom panel and flap. Three screw fasteners ensure firm and exact hinge seating in bottom panel and flap. Hole edge break-out is hidden by covering lip. In open position, inside face edges of bottom panel and flap are flush before height adjustment.

    • Flap hinge for overlay flaps
    • Quality classification under EN 15828, Level 2
    • Separate installation of bottom panel and flap element
    • Flap alignment through adjustment of height, sides and depth
    • Same drilling sizes in bottom panel and flap elements
    • Hole drilling concealed by rim on both parts
    • Without height adjustment, bottom panel and flap are flush on the inside when open
    • Can only be used in conjunction with flap stays
    • Nickel plated die-cast zinc