MultiTech LS Front Connector 86-214

Other products by Hettich
Item #: 9052275
Reg. Price: $3.79
Web Price: $1.67 Each
Quantity:
 
88 in stock.
Usually Ships in 24 hours.
Additional quantities usually ships in
1-4 weeks
Drawer Slides
  • buy at least 100, save 15%
  • buy 20 to 99, save 10%
  • buy 10 to 19, save 5%

Description 

Hettich Logo

Front Connector for Hettich MultiTech LS, 86 mm thru 214 mm height versions. Price is each. 2 required per drawer.

 

Please Note: These will not work with older MultiTech drawer slides that have a left and right handed bracket. If you are fixing an existing MultiTech please read our article on How to change an old Hettich MultiTech front connector.

Series
Unit of Measure
Each
More Hettich
Whats Included
1 connector. non-handed, works for either left or right side.

Reviews

Average Rating:
(based on 7 reviews)

Showing 1 - 5 of 7 Reviews:

RatingReviewerReview
by Brian
on 10/26/2022
from California
Exactly what I needed
Had one of these break on my kitchen drawer and I scoured the internet for the same part. Ended up learning that the part I had was discontinued. Fortunately, I found this listing, and the description in red confirmed what I already knew. Make sure to read the article as it is very helpful in knowing what to do. I ordered 2 of these front connectors and the corresponding sides per the article. Installation was straight forward. Thanks OVIS!
by Dan
on 6/2/2022
from New York
Great product!
Thank you for a great product! New design is much better than old and not all that difficult to figure out. And once you do one, you’re all set to fix the rest! Drawers work like new and an expensive kitchen remodel was avoided! So glad this company exists to help!!
by Huidong Ma
on 5/25/2020
from CA
Great product
The product is easy to install as long as you understand how it works. It would be better if a easy manual could be provided to show how to work with other parts of the drawer,
by Steve Kovacs
on 5/6/2019
from Richmond, BC, Canada
Thank you
Thanks for all your help over the phone to make sure that we got the correct replacement parts for the older MultiTech sytem. I had checked all of my local area in Vancouver, Canada to get replacement parts for the old MultiTech cabinet system that that was installed in our brand new house years ago. No cabinet outlets here could find me replacement parts, so I stubbled here to find them. Instructions on the website were easy to understand, and with a few minutes on the phone with support parts were ordered and installed as of now. Easy as described on the website and I didn't need the inner tracts as someone had mentioned in one of the reviews - I guess we both got off lucky! Again guys...thanks for all your help!
by Dennis Tysick
on 4/12/2019
from Kingston Ontario
MultiTech LS Front Connector 86/214
The connectors on cupboard drawers have broken down after many years so I ordered new connectors and found out after I received them the design had been changed and there was No more of the old ones in stock. So I now have 16 of the new design which will not work. Don’t know what to do, cupboard drawer fronts are off and it is a mess. The cupboards are in wonderful shape otherwise so I do not know what to do. Why did the design of connectors change? Thanks for listening OVIS Response: We already have an article about this, and it states this is the new design in the description, the part in bold red letters. It also has a link to the article about how get order the correct parts.
12
Review and Rate this Item

Customer Testimonials