20" Stainless Steel Drawer Slide, 38 Mm, 73Lb

Other products by Sugatsune
Item #: ESR-3813-20
Reg. Price: $42.79
Web Price: $31.68 Pair
11 in stock.
Usually Ships in 24 hours.
Additional quantities usually ships in
1-4 weeks
Drawer Slides
  • buy at least 100, save 15%
  • buy 20 to 99, save 10%
  • buy 10 to 19, save 5%


The Sugatsune ESR-3813-20 is a 20 inch full extension stainless drawer slide. The 304 grade stainless drawer slides are ideal for use in damp, corrosive, coastal and marine applications such as boats, beach houses, laboratories, locker rooms, etc.
Unit of Measure
  • 304 grade stainless steel
  • Full Extension
  • Front Disconnect
  • Hold-in Detent
  • Non-Handed
  • Price is per pair
  • Screws NOT included
  • Use #8 pan head screws or similar
  • Extension
    Full Extension
    Side Mount
    Installation width
    12.2 mm (0.48")
    38 mm (1-1/2")
    Closed Length
    500 mm (19-11/16")
    508 mm (20")
    More Help
    Email Support


    Average Rating:
    (based on 1 review)

    Showing 1 Review:

    by Frank
    on 6/14/2016
    from Delaware
    Good but difficult to mount
    These are well made slides that are a little forgiving on the width clearance. You can be wide by a 16th of an inch in width and they still operate smoothly. They are 304 stainless and are somewhat magnetic - probably due to being cold rolled. My only dislike is the fact that there is no screw slot to adjust these up and down. You MUST get them level on the first
    Review and Rate this Item

    Customer Testimonials