24" Over Extension Drawer Slides, 130 lb.

Other products by Hettich
Item #: 04932-024-02500
Reg. Price: $27.97
Web Price: $21.77 Pair
5 in stock.
Usually Ships in 24 hours.
Additional quantities usually ships in
1-2 Weeks.
Drawer Slides
  • buy at least 100, save 15%
  • buy 20 to 99, save 10%
  • buy 10 to 19, save 5%


Hettich Logo

The Hettich/Grant KA 4932 ball bearing 24" over extension drawer slides are a telescopic precision over extension drawer  slide with cushioned in and out stops and a positive hold-in detent. The KA 4932 is made of chromated steel with precision ball bearings and provides a smooth sliding action and high lateral stability to reduce the wiggle in the extended drawer.


Over extension drawer slides provide an extra extension of the drawer box so that the back of the drawer is still accessible even when something like a countertop over hangs above the drawer. The Hettich KA 4932 24" over extension drawer slides have 1-1/2" of over extension so that the back of the drawer box extends past the face of the cabinet by 1-1/2". 


Priced per pair, screws not included.


Weight capacity 130 lbs. (45kg) K.C.M.A. Installation Width: 1/2" (12.7mm) Height: 1-61/64" (49.7mm)


Features & Specifications of the Hettich KA 4932, 24" over extension drawer slides.

Unit of Measure
  • 1-1/2" of Over Travel
  • Release levers to remove drawer
  • Cushioned in and out stops
  • Zinc plated steel
  • Price is per pair. Screws not included
  • Instructions in specification sheet linked below
  • Extension
    Over Extension
    Side Mount
    Installation width
    1/2", +1/32" -0 (each side)
    49.7 mm (1-61/64")
    Closed Length
    24 inch
    Extension Loss
    More Help
    Email Support
    Deerwood, MPXP08012R2Z, #8 x 1/2" Pan Head Phillips Tapping Screws


    Average Rating:
    (based on 1 review)

    Showing 1 Review:

    by Bill Young
    on 9/12/2020
    from CO
    Like the additional extension
    I bought these glides to attach to my PC so it can slide in and out of my desk cabinet easily. I have a large PC that barely fits in my desk cabinet. Since these 3-piece rails extend longer than their actual length, this allows me to pull out my PC further than the cabinet opening so I can reach the back of my PC without having to pull out my desk from the wall. Only improvement would be to add many more periodic holes maybe every 0.5" along both the large outside rail and small inside rail to allow easier lining up with existing holes (in my PC case) better. All I could do was mount it backwards (inside rail facing out, outside rail facing in) but it works well. I'd buy again!
    Review and Rate this Item

    Customer Testimonials

    Related Products

    Hettich, 03338-024-44100, 24" Heavy Duty Locking Drawer Slides