30" Drawer Slides, 220 lb. Heavy Duty, Full Extension

Other products by Hawthorne & Reid
Item #: HR2054300001
Reg. Price: $99.95
Web Price: $92.76 Pair
Out of Stock
Pre-Order Now,
Usually Ships in 1-4 weeks
Subject to U.S. Availability.
Heavy Duty Drawer Slides
  • buy at least 60, save 15%
  • buy 15 to 59, save 13%
  • buy 5 to 14, save 10%
  • buy 3 to 4, save 5%


Please Note: We are replacing this slide with the Fulterer FR 5609 30" heavy duty drawer slide. It has better weight capacity and is significatly cheaper.

The Hawthorne & Reid HR2054300001 30" heavy duty drawer slides have a 220 lb. weight capacity. They have a 1” over travel to allow extra access to the back of the drawer. The center member has a channel to allow clearance for a pan head screw to be used to attach the cabinet member to the cabinet.


Each section of the slide is made from zinc plated, 2 mm thick, cold rolled steel. The large, high precision ball bearings are enclosed in a steel ball bearing cage for maximum durability. A thick hard rubber bumper will absorb heavy impacts from slamming drawers for years to come. The bumper also holds the drawer closed.


The HR2054 heavy duty glide requires 3/4” of installation width on each side of the drawer. You should make your drawers 1-9/16” smaller than the cabinet opening, which allows 1/32” on each side for expansion and contraction and not bind your drawer. The lever release for this non-handed drawer slide will point up or down depending on whether the slide is mounted on the left or right side.


Price is per pair, screws not included.

Features & Specifications of this 30” Heavy Duty Drawer Slide

Unit of Measure
  • 1" over travel.
  • 2 mm thick cold rolled steel.
  • Lever releases to remove drawer.
  • High precision ball bearings.
  • Hat channel to allow pan head screws in cabinet member.
  • Extension
    Over Extension
    Side Mount
    Installation width
    3/4" each side
    54mm (2-1/8")
    Closed Length
    30 inch
    More Help
    Email Support
    Deerwood, CPXP08034R2Z, #8 x  3/4 Screw, Pan Head Phillips,  Zinc


    Average Rating:
    (based on 3 reviews)

    Showing 3 Reviews:

    by Tom Todd
    on 3/17/2021
    from Saline, Michigan
    Great slides
    I needed some long-reach slides and these do the job. They’re easy to install and provide great support even when fully extended. I’m not putting anything close to the weight limit, but a heavy KitchenAid mixer is no problem for them.
    by Tim Horst
    on 4/19/2018
    from Pa
    30" Drawer Slides, 220 lb. Heavy Duty, Full Extension
    30" Drawer Slides, 220 lb. Heavy Duty, Full Extension. Great slide great slide
    by Bob
    on 11/11/2015
    from Cookeville tn
    Heavy duty
    Good solid slide. I didn't need the 220 lb capacity but I really like these industrial duty slides. They are shipped without screws so you need some no 8 and no 10 screws to mount. Use all 4 screws in each side of the drawer
    Review and Rate this Item

    Customer Testimonials