46" Heavy Duty Locking Drawer Slide, FR5400-L

  • 46" Heavy Duty Locking Drawer Slide, FR5400-L
  • Diagram of the Fulterer FR 5400L, 46" Heavy Duty Locking Drawer Slide

click on thumbnail to zoom
Other products by Fulterer
Item #: 5619
Reg. Price: $219.95
Web Price: $173.40 Pair
2 in stock.
Usually Ships in 1-2 days.
Additional quantities usually ships in
1-2 Weeks.
Heavy Duty Drawer Slides
  • buy at least 60, save 16%
  • buy 15 to 59, save 13%
  • buy 10 to 14, save 10%
  • buy 5 to 9, save 5%


Fulterer Logo

he Fulterer FR5400.L, 46" Heavy Duty Locking Drawer Slides,  (550 lb. Class). This 46" model has a static weight capacity of 440 lbs. or 200 kg.. Please note: The Lock handle protrudes an additional 1-3/8" (35mm) longer than the length of the slide itself.

It can work as a lock-in only, or lock-in and lock-out drawer slide depending on the orientation of the slides. All you need to do is swap the left and right sides and the locking mechanism will operate in the other mode. 

The slide rails are made from cold rolled, galvanized steel and have stainless steel ball bearings with plastic bearing cages to reduce noise. Price is per pair, screws not included.

Features and Specifications for the Fulterer FR 5400.L 46" Locking Drawer Slides

Weight Class
550 lbs.
See more: Fulterer FR5400L
Unit of Measure
  • Lock-in and Lock-out or lock-in only depending on orientation
  • Up to 550 lbs. weight capacity
  • Full Extension
  • Precision ball bearings
  • Heavy-duty
  • 3/4" Installation width
  • Please note: The Lock handle protrudes an additional 1-3/8" (35mm) longer than the length of the slide itself.
  • Extension
    Full Extension
    More Fulterer
    Whats Included
    1 Pair of drawer slides for 1 drawer.
    Side Mount
    Manufactured in
    Installation width
    Closed Length
    46 inch
    Disconnect Type
    Soft Close
    More Help
    Email Support


    Average Rating:
    (based on 1 review)

    Showing 1 Review:

    by Tyler
    on 9/8/2017
    from Bishop, CA
    Poorly Designed Locking Mechanism
    The lock-in mechanism is dependent on cheap, thin, metal tabs which have extremely low clearance from the side of the drawer box. Eventually (a couple weeks for me), the slides develop enough play that the tabs will contact the drawer box and deform. You will have to use pliers and/or a hammer to re position the tab so the drawer works again. I am 6 months in and one of the tabs has completely broken off. I added a weld bead to the other tab to reinforce it, so it is still attached, but needs to be readjusted every few weeks. Avoid these slides, or get the non-locking version.

    OVIS Response: Fulterer has updated and improved the locking mechanism in late 2017, we haven't had any issues since.
    Review and Rate this Item

    Other Items In This Category

    Customer Testimonials

    Related Products

    46 inch Heavy Duty Drawer Slide, FR5400
    48" Drawer Slides, Heavy Duty, Full Extension by Hettich, 03320-048-44

    Top Sellers