Cabinet Hinge, 3/4 in Butt Hinge, Satin Nickel

Other products by Hawthorne & Reid
Item #: HR1050SN001P
Reg. Price: $9.79
Web Price: $6.18 Pair
Quantity:
 
8 in stock.
Usually Ships in 24 hours.
Additional quantities usually ships in
1-4 weeks
Cabinet Hinges
  • buy at least 200, save 20%
  • buy 50 to 199, save 10%

Description 

Hawthorne & Reid, Cabinet Hinge, 3/4 in Butt Hinge, Satin Nickel. This non-mortise butt hinge is designed for 3/4" thick face frame and 3/4" thick inset cabinet doors. Decorative turned finials add a classic touch to the flexible and functional design, with a total length tip-to-tip of 2-3/4". The cabinet leaf (2-1/4" tall) wraps around the face frame and has oval screw holes for height adjustment. The cabinet door leaf has oval holes for left and right adjustment, and a round hole for permanent fixing once adjusted. Price is per pair including screws.
Unit of Measure
Pair

Reviews

Average Rating:
(based on 1 review)

Showing 1 Review:

RatingReviewerReview
by Bill
on 2/12/2024
from Texas
Somewhat of a speciality hinge
Spent a good day locating this hinge. Even asked my brother-in-law (wood worker for 20 years) for help locating. Eventually, found this from OVIS. Tried to get some dimensions of spec sheet from them but they did not have. However they did roughly give me what I needed over the phone. The hinge did come by USPS and had been shipped out quickly. When it arrived, I made a mock up of the hinge operation and gap which would exist between panels. We did have to increase the gap to match our other spacing as the hinge by itself is a close fit hinge with about 0.030" gap between the two panels. We enlarged with some small spacers on both sides. Got the gap up to about 1/8". I got a big thank you from my wife on the washer/dryer enclosure, I would buy again from OVIS!
Review and Rate this Item

Other Items In This Category

Customer Testimonials